£77.09 (incl. VAT £92.51 )

Moisture Tolerant Epoxy Primer

ARDEX R 3 E is a two-component, solvent free epoxy resin, for use on concrete and cementitious surfaces that have damp surfaces, prior to the installation of polyurethane screeds and self-smoothing epoxy floor coatings.

ARDEX R 3 E Moisture Tolerant Epoxy Primer is a two component solvent free epoxy resin for use on concrete and cementitious surfaces that havedamp surfaces (e.g. from water spillages or rain) prior to installing polyurethane screeds and self-smoothing epoxy floor coatings.Also ideal for use with ARDEX SD-TB/ARDEX K 80 Industrial FloorSystem. Blind with ARDEX Fine Aggregate and used as a primer prior toapplying thick applications of the ARDEX SD-TB/ARDEX K 80 Industrial Floor System, or other appropriate ARDEX cement-based products.

Unit Sizes Available: 6kg & 25kg

Coverage: 24m2 per 6kg unit & 100m2 per 25kg

Moisture Tolerant Epoxy Primer

ARDEX R 3 E is a two-component, solvent free epoxy resin, for use on concrete and cementitious surfaces that have damp surfaces, prior to the installation of polyurethane screeds and self-smoothing epoxy floor coatings.

ARDEX R 3 E Moisture Tolerant Epoxy Primer is a two component solvent free epoxy resin for use on concrete and cementitious surfaces that havedamp surfaces (e.g. from water spillages or rain) prior to installing polyurethane screeds and self-smoothing epoxy floor coatings.Also ideal for use with ARDEX SD-TB/ARDEX K 80 Industrial FloorSystem. Blind with ARDEX Fine Aggregate and used as a primer prior toapplying thick applications of the ARDEX SD-TB/ARDEX K 80 Industrial Floor System, or other appropriate ARDEX cement-based products.

ARDEX R3 E Solvent Free Epoxy Primer is a two component solvent free epoxy resin for use with ARDEX polyurethane screeds, self-smoothing epoxy floor coatings and ARDEX cement/sand screeds. Blind with ARDEX Fine Aggregate and use as a primer prior to application of the ARDEX SD-T Industrial Floor System, or other appropriate ARDEX cement-based products. Where surfaces are very porous, more than one coat of primer may be required to achieve the desired bonding efficiency.

For applications on new concrete or where the relative humidity (RH) of the substrate is in excess of 75%, ARDEX DPM should be used.

If the substrate is particularly smooth, the surface of the ARDEX R 3 E Solvent Free Epoxy Primer should be seeded with ARDEX Fine Aggregate immediately after application to give a mechanical key to facilitate installation of resin screeds and toppings.

 

Unit Sizes Available: 6kg & 25kg

Coverage: 24m2 per 6kg unit & 100m2 per 25kg

Ardex R3E Data Sheets