SKU: 18270 Category:

£15.54 (incl. VAT)

  • Fix Ceramic Tiles after 48 hours
  • Fix Natural Stone Tiles after 3 days
  • Fit Carpet, Vinyls or Wood Floor Coverings after 6 days
  • Pumpable for fast application and tight access areas
  • Commission your Underfloor Heating after 6 days
  • Save Two Months on your over all Build
  • Coverage: 1:7 mix = 0.27kg/m²/mm

For more information on Ardex A23, please take a look at our online technical datasheet.

Is Ardex A23 right for your job?

You can cut your drying time in half by using Ardex A35 instead.  For external screeding jobs, use Ardex A38.

You may also like…

£31.75 (incl. VAT)
£32.80 (incl. VAT)

ARDEX A23

ARDEX A23 Rapid Hardening Cement for Floor Screeds

FastTrack Screeding, supply and install quick drying floor screeds, using cement such as Ardex A23 Rapid Drying cement. An internal cement where early foot traffic is required and rapid drying is essential. Cement you can walk on within 5 hours and commence work after only 48.

FastTrack Screeding, understand that certain projects require fast turnaround times, avoiding time delays is a prime factor of contractors budget concerns.

An impressive product, Ardex A23 is a huge advancement in the industry, especially when compared to traditional screeds, which take a number of months to dry. This allows FastTrack Screeding to provide customers with quick solutions to meet any requirement.

  • Bonded, Un-Bonded or Floating Screed.,
  • Used with Underfloor Heating Systems.
  • Pumped for Fast Application.
  • Working time of the mixed mortar is approximately 45 minutes at 20°C

Gone are the days of waiting months; Ardex A23 screed sets within 8 hours of laying, regardless of thickness.

  • We believe it is always beneficial to provide quotations based on actual projects, so reflecting accurate information in regard to quantities, number of floors, site access, and site location work programme and delivery schedules is a must.
  • Fasttrack Screeding Ltd are finding a growing number of our customers are using our estimating service.

ARDEX P51

A perfect partner for Ardex A23 is ARDEX P51 a concentrated water-based primer and bonding agent that when diluted with an equal volume of water and Ardex A23 is a grouting slurry for bonded screeds.

ARDEX E100

In addition ARDEX E100 is an additive to improve the workability, plastic properties and mortar, without increasing the water content. ARDEX E100 allows bonded cement/sand screeds to be applied as little as 15mm thick. Reducing early age crack formation and surface dusting, while increasing abrasion resistance, compressive and tensile strengths.

Ardex A23 Datasheets