SKU: 22602 Category:

£114.59 (incl. VAT)

One Component Residual Moisture Vapour Suppressant

ARDEX MVS 95 protects the final floorcovering from residual construction moisture, ensuring fast track flooring installations. ARDEX MVS 95 is ideal for use in new construction or refurbishment projects where a structural damp proof membrane is present and the relative humidity of the floor does not exceed 95% RH.

  • Fast drying – ARDEX Levelling and Smoothing Compounds can be applied in as little as 2 hours
  • Apply ARDEX Levelling and Smoothing Compounds direct without priming
  • Suitable for use on heated screeds
  • Ready for use, resealable and reusable
  • Water-based, low VOC technology
  • Technical Datasheet
  • Health and Safety Datasheet

Unit Size Available: 12kg

Launch Calculator

One Component Residual Moisture Vapour Suppressant

ARDEX MVS 95 protects the final floorcovering from residual construction moisture, ensuring fast track flooring installations. ARDEX MVS 95 is ideal for use in new construction or refurbishment projects where a structural damp proof membrane is present and the relative humidity of the floor does not exceed 95% RH.

ARDEX MVS 95 is a ready for use, one component, water based, dispersion coating supplied in pre-gauged 12kg units. ARDEX MVS 95 is supplied pigmented blue to indicate uniform coverage and is waterproof when fully cured.

ARDEX MVS 95 is designed to suppress residual construction moisture in cementitious substrates including suitably prepared power floated concrete and cement/sand screeds. ARDEX MVS 95 is designed for use as a two coat system. When fully dry, two coats of ARDEX MVS 95 produces a membrane which can accommodate hygrometer readings up to 95% RH, and allows the subsequent application of ARDEX Levelling and Smoothing Compounds without priming.

ARDEX MVS 95 can be used on heated screeds that have been installed and commissioned in accordance with BS 8204 Part 1, taking into account the recommendations in Part 4 of BS EN 1264. It is not suitable for use on direct to ground substrates without a functioning,structural damp proof membrane. Please refer to the ARDEX DPM, ARDEX DPM 1 C or ARDEX DPM 1 C R datasheet for applications where no structural damp proof membrane exists or the relative humidity is above 95% RH

Unit Size Available: 12kg

 

 

Coverage: Refer to product datasheet